EPS sheets · American Fork, Utah
4x8 EPS foam sheets in Utah
Need EPS board at a thickness the big stores don't stock? We carry 4x8 EPS foam sheets in 1 lb and 2 lb density, from 1/2 inch thick and up, and cut custom thicknesses on our CNC hot-wire machine. Every sheet is cut and fabricated in American Fork, Utah.
Sheets
Cut to the thickness your plans call for
Use EPS sheets for walls, under-slab, roofs, sheds, containers and craft builds. Tell us the thickness, the sheet size and how many you need.
One 4x8 sheet covers 32 square feet, so divide your area by 32 and add a few for cuts. Pick up by appointment in American Fork, or we deliver across the Wasatch Front.
Typical R-value
| Density | R per inch | 4 in sheet |
|---|---|---|
| 1.0 lb EPS | R-3.9 | about R-15.6 |
| 1.5 lb EPS | R-4.2 | about R-16.8 |
| 2.0 lb EPS | R-4.4 | about R-17.6 |
Typical values at 75°F from the Rapid Insulation EPS data sheet (REV004). Ask us for the full sheet.
FAQ
EPS sheet questions
What thicknesses of EPS do you cut?
From 1/2 inch thick and up, including odd thicknesses to match your plans.
Should I use 1 lb or 2 lb EPS?
2 lb EPS is firmer and a better fit where the foam carries load, like under slabs. 1 lb works for walls and general use. Ask us if you're unsure.
Can I buy full EPS blocks?
Yes. Ask for full EPS blocks or blocks cut to size.
How many sheets do I need?
One 4x8 sheet covers 32 square feet. Divide your area by 32 and add a few sheets for cuts.
Do you deliver EPS sheets?
Yes, across Utah County, Salt Lake and the Wasatch Front. Delivery is quoted per job. Pickup is by appointment in American Fork.
Get a custom quote
Tell us what you need
Call: (760) 650-5737Email: contact@rapidinsulationutah.com
Pickup: 7501 N 6500 W, American Fork, UT, by appointment