EIFS & stucco · American Fork, Utah

EPS foam trim and shapes for EIFS and stucco

Rapid Insulation cuts EPS foam trim and architectural shapes for EIFS and stucco walls: window and door trim, sills, bands, cornices, quoins, keystones and custom profiles. Every piece is cut and fabricated in American Fork, Utah, for stucco crews, builders and homeowners across the Wasatch Front.

Get a custom quote (760) 650-5737

Trim and shapes · Design your EIFS trim · Match existing trim · For crews

Stack of CNC-cut white EPS stepped profiles — EPS profiles cut on the CNC hot-wire in American Fork.

Cornice, arch and band profiles cut from EPS in our American Fork shop. Video has no sound.

Watch it cut

From drawing to finished trim

We draw the profile, then the CNC hot-wire follows it through the EPS block. Every piece in the run comes out the same shape.

Have a drawing or a photo of the trim you need? Send it over, or lay it out in the trim builder.

Design your EIFS trim Get a custom quote

Trim and shapes

EPS shapes for EIFS and stucco walls

Every piece is cut from EPS to your profile and length. Tell us the shape and how many lineal feet you need.

EPS

Window and door trim

Head, jamb and sill pieces to frame each opening. Send the opening sizes and we'll build the cut list.

EPS

Sills

Sill shapes with a sloped top, so water runs off instead of sitting on the ledge.

Long run of EPS trim profiles cut into a white foam block

EPS

Bands and flat trim

Flat and stepped bands to break up a long wall or tie a row of openings together.

Graphic for church and temple projects showing three white EPS trim shapes: a round arch trim, a stepped cornice and a trim band

EPS

Cornices and crowns

Cornices, arches and trim bands for church and temple projects, cut to the profile on your plans or to match what's already there. Ask for a sample piece.

EPS

Quoins and keystones

Corner quoins and keystones for arches and openings, counted by the piece.

Custom hot-wire cut white EPS foam shape in the shop

EPS

Custom profiles

Columns, pilasters, brackets, arches and one-off shapes cut from your drawing.

EIFS trim builder

Design your EIFS trim online

Free online tool

Lay out your trim, then send it to us

Pick a profile, set the height, projection and lineal feet, and see it in 3D. Add your window and door sizes for a cut list. When it looks right, send it and we'll get back to you with a quote.

Design your EIFS trim

Rather not use the tool?

Send a drawing or a photo

A drawing or sketch with dimensions
A photo of the trim end with a tape on it
A short sample piece dropped off at the shop
Lineal feet per profile, or opening sizes

Get a custom quote

Repairs and matches

Match the trim that's already there

Fixing a damaged band, adding on, or matching a neighbor for the HOA? Send a photo of the trim end with a tape measure across it, or bring in a piece. We trace the profile and cut new lengths to match.

Because we cut on a CNC hot-wire machine, the profile stays the same from the first piece to the last, across every opening on the job.

For stucco and EIFS crews

Cut for the way your crew works

We cut raw EPS shapes, ready for your mesh, base coat and finish. Pieces are cut in standard lengths and labeled by profile, so they're easy to sort at the job.

We work with crews across Utah County, Salt Lake and the Wasatch Front on new builds, remodels and repairs, and we keep your profiles on file for the next order.

How to order

Three steps to your order

Send the profile and the lineal feet, or lay it out in the trim builder and send it from there.

Send us the job
Call or email with sizes and quantities, a drawing, or a photo with a ruler in it. You can also drop off the part.
Get a custom quote
We look it over and send you a quote for your job.
Pick up or get it delivered
Pickup in American Fork by appointment. Delivery up and down the Wasatch Front is quoted per job.

We take cash, card (3.5% fee), check, Zelle and Venmo.

Custom cuts take a 50% deposit. Stock sheets are paid at pickup.

Call (760) 650-5737 Email for a quote

Other shapes

Need something besides trim?

Custom cutting

Custom cutting →

Letters, props, forms and profiles from your drawing.

EPS sheets

EPS sheets →

Flat EPS sheets cut to thickness.

FAQ

EIFS and stucco trim questions

Don't see your question? Call or email us.

Where can I get EPS foam trim for EIFS or stucco in Utah?

Rapid Insulation cuts EPS foam trim and shapes at its shop at 7501 N 6500 W in American Fork, Utah. Pickup is by appointment, and delivery along the Wasatch Front is quoted per job. Call (760) 650-5737 or email contact@rapidinsulationutah.com.

What EIFS and stucco shapes do you cut?

Window and door trim, sills, bands, cornices and crown shapes, quoins, keystones and custom profiles from your drawing. We cut them from EPS on a CNC hot-wire machine, so every piece in a run matches.

Can you match the trim already on my building?

Yes. Send a clear photo of the end of the trim with a tape measure held against it, or bring us a short sample piece. We trace the profile and cut new pieces to match.

Do the pieces come coated?

We cut raw EPS shapes, ready for your crew's mesh, base coat and finish. If you want to talk about coating, ask us when you send the job.

How do I order foam trim?

Send the profile (a drawing, a sketch with dimensions, or a photo with a tape), the total lineal feet for each profile, and your window and door sizes if it's a surround. Quoins and keystones are counted by the piece. You can also lay out your trim in our EIFS trim builder and send it from there.

Do you supply stucco and EIFS contractors on repeat jobs?

Yes. We work with stucco and EIFS crews on new builds, remodels and repairs, and we save your profiles so the next order matches the last one.

Other foam we cut

Insulation

Tell us what you need

Call: (760) 650-5737
Email: contact@rapidinsulationutah.com
Pickup: 7501 N 6500 W, American Fork, UT, by appointment

Call (760) 650-5737 Email a drawing